• April 06. 2022

Soils can be sandy, soft, rocky, or clay, depending on altitude, water table, and environment. Solar installers have to contend with many unique soil requirements when working on ground installation projects. Three of the most common solar ground installation solutions - piling, ground screws, concrete ballast. Piling There are two types of solar piling systems: C-type piles and U-type piles, whic...

• May 20. 2022

Photovoltaic mounting structures (also known as solar mounting systems) are used to support solar arrays on any surface, usually on a roof or directly on the ground, but also on the side of a building. Since roof supports are generally less expensive, more people prefer to use the structural support of an existing roof. However, ground mounted systems are easier to access and maintain, and working...

• May 26. 2022

Solar farms are large ground-mounted solar energy systems. They use solar panels or other means of harvesting solar energy, such as concentrating solar systems, to harness the sun's energy so that crops can be grown beneath the panels. This is a solar farm, also known as agricultural photovoltaics. Solar farms are also known as "solar parks", "solar power plants" and "solar power stations". They o...

• September 02. 2022

You will only see these solar panels when they are installed on the roof. But underneath the panel there is a structure that holds the solar panels in place. This structure is called a solar shelf or solar mount. Therefore, solar mounts are an important part of every solar system, connecting the solar panel system to the roof or ground. In simple terms solar racking systems or solar panel mount ar...

• September 28. 2022

The photovoltaic off-grid power generation system is generally composed of a photovoltaic array composed of solar cell components, a solar controller, an inverter, a battery bank, and a load. The photovoltaic array converts solar energy into electric energy under the condition of light, and supplies power to the load through the solar controller, inverter (or inverter integrated machine), and char...

• December 01. 2022

Solar inverters, also known as power regulators and power conditioners, are an essential part of photovoltaic solar power generation systems. The main function of the photovoltaic inverter is to convert the direct current generated by the solar panel into the alternating current used by household appliances. All the electricity generated by the solar panel must be processed by the inverter before ...

• December 14. 2022

A solar tracker is a solar mounting system that uses equipment such as motors, gears, and other moving equipment mounted on a mounting structure to allow the solar panels to rotate and follow the sun throughout the day. By keeping the panels perpendicular to the sun, more sunlight hits the solar panels, less light is reflected, and more energy is absorbed, generating more electricity. Installing a...

• December 26. 2022

There are three basic types of solar power systems: grid-tied solar power systems, off-grid solar power systems, and backup power systems. Grid-tied Solar Power System Grid-tied solar power system is the most common type of solar power system and the most cost-effective solar power system.It is a solar power system connected to the home and traditional electric utility grids. This type of solar po...

• April 04. 2023

Metal roofs are considered the best medium for photovoltaic systems because metal roofs are specially designed and prefabricated to meet the needs of the building's climate and location, and the warranty period is usually as long as 40 years or so. And the average lifespan of solar panels is typically around 20 to 25 years, so metal roofs don't have to worry about the risk of needing to replace th...