• April 06. 2022

Soils can be sandy, soft, rocky, or clay, depending on altitude, water table, and environment. Solar installers have to contend with many unique soil requirements when working on ground installation projects. Three of the most common solar ground installation solutions - piling, ground screws, concrete ballast. Piling There are two types of solar piling systems: C-type piles and U-type piles, whic...

• May 16. 2022

Components of a solar photovoltaic system include solar panels, inverters, solar mounts, and solar cell storage units (if required). Solar Panel The solar panel is the most visible element of a photovoltaic system, which is why you're probably most familiar with it. They're essentially "signatures" of solar power, and we usually tell if someone is using solar power to power their home by looking f...

• May 20. 2022

Photovoltaic mounting structures (also known as solar mounting systems) are used to support solar arrays on any surface, usually on a roof or directly on the ground, but also on the side of a building. Since roof supports are generally less expensive, more people prefer to use the structural support of an existing roof. However, ground mounted systems are easier to access and maintain, and working...

• May 26. 2022

Solar farms are large ground-mounted solar energy systems. They use solar panels or other means of harvesting solar energy, such as concentrating solar systems, to harness the sun's energy so that crops can be grown beneath the panels. This is a solar farm, also known as agricultural photovoltaics. Solar farms are also known as "solar parks", "solar power plants" and "solar power stations". They o...

• June 14. 2022

Now people see a lot of solar products when they buy all kinds of electrical products. Choosing such a product can not only contribute to environmental protection, but also save more usage costs for users. We all know that ordinary electrical products only need power supply to work, solar brackets and solar electrical products do not need power supply, and solar brackets only need to use solar ene...

• June 24. 2022

The technical route of photovoltaic modules mainly includes three types: polycrystalline silicon, monocrystalline silicon and thin film. All technologies have advantages and disadvantages. Under the same conditions, the efficiency of a photovoltaic solar system is only related to the nominal power of the module, not directly related to the efficiency of the module. The component technology is matu...

• July 04. 2022

Unlike crystalline silicon, perovskites are made up of a family of materials named after the mineral from which they are made, which in turn is named after Lev Perovski. Perovskites have great potential in the solar industry for the fabrication of perovskite solar cells, making them the most promising among third-generation photovoltaic cells. In just 5 years, the efficiency of perovskite solar ce...

• July 28. 2022

Thin-film solar panels are the second generation of solar panels, which are made by depositing one or more layers of photovoltaic photon absorbing materials on substrates such as glass, plastic or metal. Thin-film cells are very thin, typically ranging in thickness from a few nanometers to tens of microns, which makes thin-film solar cells both flexible and lightweight. Because of their high flexi...

• August 24. 2022

An international research team has developed a cubic luminescent solar concentrator (LSC) photovoltaic device that can be assembled into a mosaic configuration for applications in urban environments. The best performing device achieved a power conversion efficiency of 11.6%. A Dutch-Australian research team has developed a 1 cm3 luminescent solar concentrator (LSC) device equipped with 20% efficie...