• July 28. 2022

Thin-film solar panels are the second generation of solar panels, which are made by depositing one or more layers of photovoltaic photon absorbing materials on substrates such as glass, plastic or metal. Thin-film cells are very thin, typically ranging in thickness from a few nanometers to tens of microns, which makes thin-film solar cells both flexible and lightweight. Because of their high flexi...

• August 24. 2022

An international research team has developed a cubic luminescent solar concentrator (LSC) photovoltaic device that can be assembled into a mosaic configuration for applications in urban environments. The best performing device achieved a power conversion efficiency of 11.6%. A Dutch-Australian research team has developed a 1 cm3 luminescent solar concentrator (LSC) device equipped with 20% efficie...

• September 28. 2022

The photovoltaic off-grid power generation system is generally composed of a photovoltaic array composed of solar cell components, a solar controller, an inverter, a battery bank, and a load. The photovoltaic array converts solar energy into electric energy under the condition of light, and supplies power to the load through the solar controller, inverter (or inverter integrated machine), and char...

• October 13. 2022

The newly developed Simple Solar Mounting Kit by Wintop is a small solar mounting system with adjustable angle. Solar Angle Adjustable Bracket, specially developed for good integration with solar kits, can be installed on flat ground or roofs, railings, balconies and gardens. It is very flexible and can adjust the tilt range between 30°~43° for more energy. Advantages & Features Adapt to a var...

• October 20. 2022

The photovoltaic cleaning robot is simple and convenient to use. Let's learn about its usage guide below. 1.Supported usage scenarios The tilt of the photovoltaic array is less than 20° (dry brushing) or 15° (water washing). The lowest point of the photovoltaic array is suspended more than 10cm. There are no obstacles within 50cm of the edge of the photovoltaic array. (If there are obstacles only ...

• November 16. 2022

Ground screws, also known as ground anchors, are an easy and environmentally friendly alternative to concrete foundations. Screws into the ground without digging before installation. More and more people are using ground screws instead of concrete foundations. So what are the advantages of grounding screws compared to concrete? 1.The ground screw has different lengths to choose from, and the depth...

• December 14. 2022

A solar tracker is a solar mounting system that uses equipment such as motors, gears, and other moving equipment mounted on a mounting structure to allow the solar panels to rotate and follow the sun throughout the day. By keeping the panels perpendicular to the sun, more sunlight hits the solar panels, less light is reflected, and more energy is absorbed, generating more electricity. Installing a...

• February 16. 2023

With the increasing popularity of renewable energy sources these days, solar power is one of the most often chosen. But for the vast majority of people living in cities, they don't have their own roofs and a large open space, and it would be perfect if they can be installed on the balcony. To install solar energy on the balcony, it cannot be a large-scale project, and it is impossible to install i...

• April 04. 2023

Metal roofs are considered the best medium for photovoltaic systems because metal roofs are specially designed and prefabricated to meet the needs of the building's climate and location, and the warranty period is usually as long as 40 years or so. And the average lifespan of solar panels is typically around 20 to 25 years, so metal roofs don't have to worry about the risk of needing to replace th...