• June 09. 2022

Tile roofs are known to be a good choice for solar panels to generate electricity. A well-installed clay or concrete tile roof can last 50 or even 100 years, more than solar panels (usually 25 years). So no need to worry about having to pay for solar panels to solve the roof replacement problem. There are many ways to install solar panels on tile roofs. The most common method is to install the sol...

• June 14. 2022

Now people see a lot of solar products when they buy all kinds of electrical products. Choosing such a product can not only contribute to environmental protection, but also save more usage costs for users. We all know that ordinary electrical products only need power supply to work, solar brackets and solar electrical products do not need power supply, and solar brackets only need to use solar ene...

• June 24. 2022

The technical route of photovoltaic modules mainly includes three types: polycrystalline silicon, monocrystalline silicon and thin film. All technologies have advantages and disadvantages. Under the same conditions, the efficiency of a photovoltaic solar system is only related to the nominal power of the module, not directly related to the efficiency of the module. The component technology is matu...

• July 04. 2022

Unlike crystalline silicon, perovskites are made up of a family of materials named after the mineral from which they are made, which in turn is named after Lev Perovski. Perovskites have great potential in the solar industry for the fabrication of perovskite solar cells, making them the most promising among third-generation photovoltaic cells. In just 5 years, the efficiency of perovskite solar ce...

• July 19. 2022

The roof is usually the most practical place to place solar panels. They get a lot of direct sunlight, there's usually nothing to block them, and they're sturdy. When the panels are connected, huge bolts hold them in place. This creates a roof mount of solar panels. Let's take a look at what types of solar roof mounting systems are available. Solar roof mounting systems can be divided into two cat...

• July 28. 2022

Thin-film solar panels are the second generation of solar panels, which are made by depositing one or more layers of photovoltaic photon absorbing materials on substrates such as glass, plastic or metal. Thin-film cells are very thin, typically ranging in thickness from a few nanometers to tens of microns, which makes thin-film solar cells both flexible and lightweight. Because of their high flexi...

• August 24. 2022

An international research team has developed a cubic luminescent solar concentrator (LSC) photovoltaic device that can be assembled into a mosaic configuration for applications in urban environments. The best performing device achieved a power conversion efficiency of 11.6%. A Dutch-Australian research team has developed a 1 cm3 luminescent solar concentrator (LSC) device equipped with 20% efficie...

• September 28. 2022

The photovoltaic off-grid power generation system is generally composed of a photovoltaic array composed of solar cell components, a solar controller, an inverter, a battery bank, and a load. The photovoltaic array converts solar energy into electric energy under the condition of light, and supplies power to the load through the solar controller, inverter (or inverter integrated machine), and char...

• October 20. 2022

The photovoltaic cleaning robot is simple and convenient to use. Let's learn about its usage guide below. 1.Supported usage scenarios The tilt of the photovoltaic array is less than 20° (dry brushing) or 15° (water washing). The lowest point of the photovoltaic array is suspended more than 10cm. There are no obstacles within 50cm of the edge of the photovoltaic array. (If there are obstacles only ...