• May 26. 2022

Solar farms are large ground-mounted solar energy systems. They use solar panels or other means of harvesting solar energy, such as concentrating solar systems, to harness the sun's energy so that crops can be grown beneath the panels. This is a solar farm, also known as agricultural photovoltaics. Solar farms are also known as "solar parks", "solar power plants" and "solar power stations". They o...

• June 02. 2022

1.Product Introduction WinTop Roof on System is developed to fit all types of tiles in solar roof mounting projects. Fasteners are uniquely designed to easier and quicker installation with the use of simple tools. Before the construction, please read our installation instructions carefully. This manual can provide you with different specifications for the construction of battery board. Our co...

• June 09. 2022

Tile roofs are known to be a good choice for solar panels to generate electricity. A well-installed clay or concrete tile roof can last 50 or even 100 years, more than solar panels (usually 25 years). So no need to worry about having to pay for solar panels to solve the roof replacement problem. There are many ways to install solar panels on tile roofs. The most common method is to install the sol...

• June 24. 2022

The technical route of photovoltaic modules mainly includes three types: polycrystalline silicon, monocrystalline silicon and thin film. All technologies have advantages and disadvantages. Under the same conditions, the efficiency of a photovoltaic solar system is only related to the nominal power of the module, not directly related to the efficiency of the module. The component technology is matu...

• July 14. 2022

With more and more people installing solar power these days, solar panels are the most critical part of any solar system installation. So how to choose solar panels is what we need to consider, mainly through the following factors. 1. Solar panel efficiency Solar panel efficiency refers to the ratio (expressed as a percentage) of the solar energy hitting the surface of the panel to the electrical ...

• July 19. 2022

The roof is usually the most practical place to place solar panels. They get a lot of direct sunlight, there's usually nothing to block them, and they're sturdy. When the panels are connected, huge bolts hold them in place. This creates a roof mount of solar panels. Let's take a look at what types of solar roof mounting systems are available. Solar roof mounting systems can be divided into two cat...

• August 12. 2022

1. Product Introduction Wintop Agricultural Greenhouse Solar PV Ground Mounting System is mainly applied to the installation of agricultural solar PV farms, achieving the dual-use of lands. According to the varied solar module arrays, the light exposure requirement of plant and the dimension of farming machines, Wintop will design a suitable solar mounting system solution with highly pre-assembled...

• September 02. 2022

You will only see these solar panels when they are installed on the roof. But underneath the panel there is a structure that holds the solar panels in place. This structure is called a solar shelf or solar mount. Therefore, solar mounts are an important part of every solar system, connecting the solar panel system to the roof or ground. In simple terms solar racking systems or solar panel mount ar...

• September 16. 2022

The orientation of the solar panel is very important. Solar panels receive the most energy when the sun's rays hit the panel surface vertically. Making sure your solar panels are oriented in the right direction and have the proper slope will help ensure they produce the most energy when exposed to the highest intensity of sunlight for the longest period of time. In the Northern Hemisphere, the gen...