• November 18. 2021

Our ground screw products introduce foreign patented technology, the spiral body is directly formed by steel plate, and the pile body will not destroy the original strength of the soil when it is driven into the ground, because the special spiral shape not only has a strong drawing force but also has the same bearing capacity! Hot-dip galvanized ground screw are also called hot-dip ...

• December 14. 2021

Solar racking systems or solar panel brackets are used to support solar panels on any surface, usually installed on the roof or directly on the ground. Roof support systems are generally more economical because they can use the structural support of the existing roof. However, ground-mounted systems are easier to maintain, and working on the roof can be less safe than working on the ground. Types ...

• January 10. 2022

To achieve the outcomes of the Paris Agreement, India has committed to obtain 40% of its electricity from renewable energy sources by 2030. As the country’s installed renewable energy capacity surpassed the 40% mark in November 2021 itself. Solar is leading India's energy transition, contributing up to 100 GW. As of November 30, 2021, India ranked sixth globally in terms of installed solar capacit...

• January 20. 2022

Researchers from Universiti Putra Malaysia have defined a series of fire safety measures that solar installers should follow when deploying residential rooftop PV systems. "Incorrect installation practices have been identified as a common factor contributing to fire hazards in photovoltaics," said the study's corresponding author. "This human error can be due to unintentional behavior or deliberat...

• February 24. 2022

There are two main types of solar power systems: on-grid and off-grid or standalone. Both stand-alone and grid-connected systems use photovoltaic panels to convert sunlight into electricity. Although both systems generate electricity in the same way, they store it differently. Standalone systems will use batteries or energy storage systems to store energy. The battery may require a charge controll...

• February 28. 2022

One of the largest areas of innovation in solar energy involves solar mounting systems.Solar mounting systems are an important part of solar panels - they attach solar panels to the roof or the ground. Traditional ground mounted systems Ground-mounted solar systems basically all work the same way, with the system anchored to the ground and housing a large number of stacked panels. Two rails typica...

• March 03. 2022

The Tesla Solar Roof takes solar panels from a popular alternative energy provider and has them specially processed to make them an effective roofing material. Solar panel mounting systems are often referred to as photovoltaic (PV) systems. The technology utilizes sunlight instead of heat that comes into contact with the panel and converts it into direct current (DC). Tesla's Building Integrated P...

• April 06. 2022

Soils can be sandy, soft, rocky, or clay, depending on altitude, water table, and environment. Solar installers have to contend with many unique soil requirements when working on ground installation projects. Three of the most common solar ground installation solutions - piling, ground screws, concrete ballast. Piling There are two types of solar piling systems: C-type piles and U-type piles, whic...

• April 13. 2022

A bifacial solar panel is a bifacial energy factory that converts sunlight into electricity at its top and bottom. They differ from single-sided solar panels that use only one side for solar energy production. Bifacial panels are equipped with solar cells on the top and rear of the panel. They are usually single crystal, although polycrystalline can be used. Because they are so thin, they resemble...